Thermostat Programs - Lopi Deerfield Manual

Thermostat Programs

This heater comes with two thermostat programs built-in. The programs allow you to modify how the stove responds to
when the thermostat setting is satisfied.
How to Get to the Thermostat Program Screen

Press the Menu Button Until "T-stat Idle
Mode" appears on the digital readout.

Press the lights on the Heat Setting slider
underneath the desired selection (On &
Off or Low Burn).
On & Off Program
When the thermostat stops calling for heat (the thermostat is open) the following happens:
The burn rate decreases to Level 1 (lowest) for 15 minutes. If there is no call for heat during that time the heater turns off.
If there is a call for heat by the thermostat (the thermostat is closed) at any point during this cool-down period then the
burn rate resumes corresponding with the setting on the control panel.
Low Burn Program
In "Low Burn", when the thermostat stops calling for heat (the thermostat is open) the following happens:
The burn rate decreases to Level 1 (low) and remains at this level until there is a call for heat by the thermostat (the
thermostat is closed), then resumes corresponding with the setting on the control panel.
© Travis Industries
Operation
12/18/20 - 1550
33
Deerfield Stove