Mounting The Housing - Bosch AEC-AMC2-VDS1 Installation Manual

AEC-AMC2-VDS1 - Installation manual
The opening for the AC supply cable (position 7) is covered by
two plastic inserts. The AC cable can either be routed through a
standard cable duct (40 mm x 25 mm) or be introduced directly
from the back of the housing. Disrupt the appropriate plastic
insert such that you can insert the power cable properly.

Mounting the Housing

Open the housing cover lock with the provided key and remove
the hood from the wall mounted frame.
Mount the metal housing at the desired position with the screw
anchors provided with the enclosure.
Use the screws (position H of the accessories kit) at the points
to mount the housing against the wall.
Figure 3 Demensions of the housing
Bosch Sicherheitssysteme GmbH F.01U.097.255 | V 3.1 | 2008.12
en 7