Mirrors
4
Adjusting mirrors
54
z
Turn the mirror to the correct
position.
Adjusting mirror arm
Push protective cap 1 up over
the threaded fastener on the
mirror arm.
Slacken nut 2.
Turn the mirror arm to the ap-
propriate position.
Tighten the nut to the spe-
cified tightening torque, while
holding the mirror arm to en-
sure that it does not move out
of position.
Mirror to adapter
22 Nm
Push the protective cap over
the threaded fastener.
Windscreen
Adjusting windscreen
Slacken clamping screws 1 on
left and right.
Pivot the windscreen forward
or back to the desired position.
Make sure that the windscreen
settings are the same on left
and right.
Tighten the clamping screws
on left and right.