Installation Guide; Installation Steps; Package Contents - Axis 215 PTZ Installation Manual

AXIS 215 PTZ Installation Guide
This installation guide provides instructions for installing the AXIS 215 PTZ Network
Camera on your network. For all other aspects of using the product, please see the User's
Manual, available on the CD included in this package, or from www.axis.com/techsup

Installation steps

1. Check the package contents against the list below.
2. Hardware overview. See page 4.
3. Mount the hardware. See page 5.
4. Assign an IP address. See page 10.
5. Set the password. See page 13.

Package contents

Item
Network camera
Power adapter
Power adapter mains
cable
(country-specific)
4-pin block connector
Drop ceiling mounting kit
Plastic domes x 2
Screwdriver
Screw kit
Template
CD
Printed Materials
AXIS 215 PTZ

Installation Guide

Models/variants/notes
• AXIS 215 PTZ 50Hz (PAL)
• AXIS 215 PTZ 60Hz (NTSC)
12V DC
• Europe
• UK
• Australia
For connecting external devices to the I/O terminal connector
1 inner bracket, 1 outer bracket
1 x for surface mounting
1 x for drop ceiling mounting
Resitorx T20
• 1 x safety wire 1m (3.3 ft)
• 2 x plug 30x3.4-4mm
• 2 x screw ST4.2x38
Use to mark positions for surface/drop ceiling mounting
AXIS Network Video Product CD, including product documentation,
installation tools and other software
AXIS 215 PTZ Installation Guide (this document)
Axis Warranty Document
Important!
This product must be used in
compliance with local laws
and regulations.
• USA/Japan
• Argentina
• Korea
• 4 x screw M4x10
• 1 x screw M4x4
• 2 x screw M4x10 resitorx
Page 3