Introduction; Audience; Abbreviations; Defi Nition Of Statements - BeaconMedaes VerusLab 4107 9021 88 Installation, Operation And Maintenance Instructions

Lubricated rotary vane laboratory vacuum system
Table of Contents

Advertisement

Lubricated Rotary Vane Laboratory Vacuum Systems

1.0 Introduction

1.1

Audience

This manual provides information related to
the installation and operation of the VerusLab
Lubricated Rotary Vane Laboratory Vacuum
System manufactured by BeaconMedæs. Service
information contained in this manual is intended
for use by technicians or personnel qualifi ed to
repair and service laboratory equipment.
1.2

Abbreviations

C
Common
CGA
Compressed Gas Association
FNPT
Female National Pipe Thread
MNPT
Male National Pipe Thread
N/C
Normally Closed
N/O
Normally Open
PSIG
Pounds Per Square Inch- Gauge
SCFM
Standard Cubic Feet Per Minute
VAC
Voltage, Alternating Current
VDC
Voltage, Direct Current
1.3
Defi nition of Statements
Statements
in
this
following words are of special signifi cance.
WARNING: Means there is a possibility of
injury or death to yourself or others.
CAUTION: Means there is a possibility of
damage to unit or other property.
NOTE: Indicates points of particular interest for
more effi cient and convenient operation.
1.4

Environmental Declarations

General
When
developing
BeaconMedæs tries to understand, address, and
minimize the negative environmental effects
that the products and services may have, when
being manufactured, distributed, and used, as
well as at their disposal.
Recycling and disposal policies are part of the
development of all BeaconMedæs products.
4107 9021 88.01
manual
preceded
products
and
services,
BeaconMedæs company standards determine
strict requirements.
When selecting materials, the substantial
recyclability, the disassembly possibilities and
the separability of the materials and assemblies
are considered as well as the environmental
perils and dangers to health during the recycling
and disposal of the unavoidable rates of non-
recyclable materials.
BeaconMedæs products for the most part
consist of metallic materials that can be
remelted in steelworks and smelting works and
that is therefore almost infinitely recyclable. The
plastic use is labeled; sorting and fractioning
of the materials for recycling in the future is
foreseen.
Disposal of Materials
Dispose contaminated substances and materials
separately,
according
environmental legislations.
Dispose all components according to the
by
applicable disposal regulations.
WARNING:
The vacuum pump may be contaminated with
dangerous foreign materials. Use personal
protective equipment (protective gloves,
protective eyewear, protective respiratory
equipment) during dismantling of the pump.
NOTE:
This concept can only succeed with
your help. Support us by disposing
professionally.
By assuring a correct disposal of the
product you help to prevent possible
negative consequences for environment
and
health
inappropriate waste handling.
Recycling and re-usage of materials helps
to preserve natural resources.
1-1
to
local
applicable
that
can
occur
with

Advertisement

Table of Contents
loading

Table of Contents