WilTec 61955 Operation Manual
  1. Manuals
  2. Brands
  3. WilTec Manuals
  4. Blower
  5. 61955
  6. Operation manual

WilTec 61955 Operation Manual

Leaf blower / leaf vac
Hide thumbs Also See for 61955:
Table of Contents

Advertisement

Quick Links

Download this manual
Operation Manual
Leaf blower / Leaf vac
61955
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignific -
antly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.

Advertisement

Table of Contents
loading

Related Manuals for WilTec 61955

Summary of Contents for WilTec 61955

  • Page 1 Operation Manual Leaf blower / Leaf vac 61955 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignific - antly.
  • Page 2 All rights reserved. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.

  • Page 3: Symbol Explanation

    Instructions for opening the vacuum suction bend. Warning: The blower can throw objects around at high speed that can ricochet and hit the user. This can cause serious eye damage. © by WilTec Wildanger Technik GmbH Article 61955 Page 3 http://www.WilTec.de...

  • Page 4: Safety Instructions

    Stirred stones or debris could otherwise be thrown in your eyes or face and lead to serious injuries and / or blindness. Always wear safety shoes. Never use the device barefoot or wearing sandals.  © by WilTec Wildanger Technik GmbH Article 61955 Page 4 http://www.WilTec.de http://www.aoyue.eu...
  • Page 5 Foreign objects such as gravel, sand, dust, grass, etc. can be picked up by the air inlet and ejected through the exhaust opening, which can damage the device or property, or cause serious injury to bystanders or the user. © by WilTec Wildanger Technik GmbH Article 61955 Page 5 http://www.WilTec.de...
  • Page 6 (e.g. from water heaters), electric motors or switches, stoves, etc. Store the device in a dry place out of the reach of children.  Secure the device during transport.  © by WilTec Wildanger Technik GmbH Article 61955 Page 6 http://www.WilTec.de http://www.aoyue.eu 2020-1...
  • Page 7 5. Fuel tank cap 13. Upper suction tube 6. Starter rope 14. Lower suction tube 7. Suction tube handle 15. Throttle flap lever 8. Spark plug © by WilTec Wildanger Technik GmbH Article 61955 Page 7 http://www.WilTec.de http://www.aoyue.eu 2020-1 http://www.teichtip.de...
  • Page 8 Note: The screw of the clamp for the pipe must be so loose that the blowpipes can be inserted into the blower outlet. Loosen the screw by turning it counterclockwise (do not remove the screw nuts). © by WilTec Wildanger Technik GmbH Article 61955 Page 8 http://www.WilTec.de...
  • Page 9 2. Slide the nozzle onto the lower blowpipe. 3. Turn the nozzle to the right until it clicks firmly into place on the lower blowpipe. 4. Each section of the pipe was then secured with a screw. © by WilTec Wildanger Technik GmbH Article 61955 Page 9 http://www.WilTec.de...
  • Page 10 1. Open the suction opening with a screwdriver. Keep the suction port lid open until the suction tube is installed. 2. Slide the lower suction tube into the upper suction tube until the lower tube is firmly seated in the upper tube. © by WilTec Wildanger Technik GmbH Article 61955 Page 10 http://www.WilTec.de http://www.aoyue.eu...
  • Page 11 Warning: Before starting the engine, both the lower and upper vacuum tubes must be installed and each section of the tube must be screwed in place. © by WilTec Wildanger Technik GmbH Article 61955 Page 11 http://www.WilTec.de...

  • Page 12: Operation

    5. Make sure the shoulder strap is adjusted to allow unobstructed airflow out of the connecting tube. If the collection bag is bent, the device will not work properly. Operation Operating position © by WilTec Wildanger Technik GmbH Article 61955 Page 12 http://www.WilTec.de http://www.aoyue.eu...

  • Page 13: Before Starting

    Use new fuel the next time you use it. Never add engine or carburetor clea - ners to the fuel tank. Your device could be permanently damaged. Alternatively, fuel stabilizers can be used during storage to reduce gum build-up. © by WilTec Wildanger Technik GmbH Article 61955 Page 13 http://www.WilTec.de...
  • Page 14 Hold the device in the starting position as shown. Hold the device so that the blower / sucti-  on pipe is not pointed at people, animals, glass or other solid objects. © by WilTec Wildanger Technik GmbH Article 61955 Page 14 http://www.WilTec.de...
  • Page 15 (the start lever returns to the "run" position). Steps 5 and 6 are not required. 5. Pull firmly on the starter handle while squeezing the throttle until the engine starts and runs. © by WilTec Wildanger Technik GmbH Article 61955 Page 15 http://www.WilTec.de...

  • Page 16: Starting A Flooded Engine

    Check the device for loose or damaged parts after each use. Clean the device and the  badges with a damp cloth and mild detergent. Dry the device with a clean, dry cloth.  © by WilTec Wildanger Technik GmbH Article 61955 Page 16 http://www.WilTec.de http://www.aoyue.eu 2020-1 http://www.teichtip.de...
  • Page 17 2. Remove the spark plug from the cylinder and discard it. 3. Replace the spark plug with an RCJ-6Y type spark plug. Fasten it with a 19 mm socket wrench. 4. Reinstall the spark plug boot. © by WilTec Wildanger Technik GmbH Article 61955 Page 17 http://www.WilTec.de...
  • Page 18 The carburetor was precisely adjusted in the factory. An adjustment of the idle speed may be necessa- ry under the following conditions. The engine does not go into idle when the hand throttle is released. © by WilTec Wildanger Technik GmbH Article 61955 Page 18 http://www.WilTec.de...

  • Page 19: Technical Specifications

    Do not operate the machine for a longer period of time (e.g. more than half an hour) to prevent dama- ge from noise and vibrations. Use a slow speed as little as possible. © by WilTec Wildanger Technik GmbH Article 61955 Page 19 http://www.WilTec.de...
  • Page 20 Always start the new season with fresh fuel in the correct petrol-oil ratio.  Others: Do not store fuel for the next season.  Replace your fuel canister as soon as it starts to rust.  © by WilTec Wildanger Technik GmbH Article 61955 Page 20 http://www.WilTec.de http://www.aoyue.eu 2020-1 http://www.teichtip.de...

  • Page 21: Troubleshooting Advice

    Have the carburetor adjusted by an authorized service Incorrect fuel mix ratio Use properly mixed fuel Choke lever in half position Vary the position of the choke lever © by WilTec Wildanger Technik GmbH Article 61955 Page 21 http://www.WilTec.de http://www.aoyue.eu 2020-1 http://www.teichtip.de...

  • Page 22: Disposal Regulations

    All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.

Table of Contents