Advertisement
Quick Links
Operation Manual
Leaf Blower, Vacuum, and Shredder
61955
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Related Manuals for WilTec 61955
Summary of Contents for WilTec 61955
- Page 1 Operation Manual Leaf Blower, Vacuum, and Shredder 61955 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
- Page 2 All rights re- served. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 Whenever several users work in the same work area, they should keep a distance of at least 15 m from one another. Risk of hot surface. Risk of burns! Risk of fire! © by WilTec Wildanger Technik GmbH Item 61955 Page 3 http://www.WilTec.de http://www.aoyue.eu...
- Page 4 • This leaf blower/vacuum cleaner is only suitable for blowing together and vacuuming leaves and other debris on the ground. © by WilTec Wildanger Technik GmbH Item 61955 Page 4 http://www.WilTec.de http://www.aoyue.eu...
- Page 5 People who often use privately or work professionally with petrol-powered devices should always keep an eye on their health and the condition of the device. © by WilTec Wildanger Technik GmbH Item 61955 Page 5 http://www.WilTec.de...
- Page 6 Suction tube handle Throttle flap lever Spark plug Assembly Delivery content The following parts are included: • Blower • Upper blowpipe • Lower blowpipe • High-speed air nozzle © by WilTec Wildanger Technik GmbH Item 61955 Page 6 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 7 3. Align the slots on the lower blowpipe with the tabs on the upper blowpipe. № Name Letter Name Flap Upper blowpipe Notch Lowe blowpiper Clamp screw and rabbet © by WilTec Wildanger Technik GmbH Item 61955 Page 7 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 8 3. Close the zipper on the collection bag. The zipper must be completely closed. 4. Remove the blower tube from the device. © by WilTec Wildanger Technik GmbH Item 61955 Page 8 http://www.WilTec.de...
- Page 9 2. Slide the lower suction tube into the upper suction tube until the lower tube is firmly seated in the upper tube. Name Nr. Name Lower blowpipe Upper blowpipe © by WilTec Wildanger Technik GmbH Item 61955 Page 9 http://www.WilTec.de http://www.aoyue.eu 2021-1...
- Page 10 5. Make sure that the shoulder strap is adjusted to allow unobstructed airflow out of the connecting tube. If the collection bag is bent, the device will not work properly. © by WilTec Wildanger Technik GmbH Item 61955 Page 10 http://www.WilTec.de...
- Page 11 Do not insert the suction tube directly into a pile as this could clog the device. The suction tube should be moved back and forth approx. 2–3 cm from the ground for optimal suction per- formance. © by WilTec Wildanger Technik GmbH Item 61955 Page 11 http://www.WilTec.de...
- Page 12 © by WilTec Wildanger Technik GmbH Item 61955 Page 12 http://www.WilTec.de...
- Page 13 Normally, the warm start can be still carried out approx. 5–10 minutes after the device has been switched off. After a downtime of more than 10 min, start the device after cold start procedure or follow the start instructions printed on the unit. © by WilTec Wildanger Technik GmbH Item 61955 Page 13 http://www.WilTec.de...
- Page 14 Air filter cover A dirty air filter will affect performance of the engine and increase fuel consumption and emissions. Clean the air filter after every 5 hours of operation. © by WilTec Wildanger Technik GmbH Item 61955 Page 14 http://www.WilTec.de http://www.aoyue.eu...
- Page 15 Nr. Name Fuel filter Fuel line Checking the exhaust retaining screws Once a year, check that the exhaust retaining screws (1) are securely tightened to prevent damage. © by WilTec Wildanger Technik GmbH Item 61955 Page 15 http://www.WilTec.de http://www.aoyue.eu 2021-1...
- Page 16 Turn the idle speed screw clockwise to increase the engine speed if the engine stops or dies. • Turn the idle speed screw counter-clockwise to decrease the engine speed. Name Nr. Name Idle regulator Air filter cover © by WilTec Wildanger Technik GmbH Item 61955 Page 16 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 17 Check the entire device for loose screws, nuts and bolts. • Replace any damaged, brittle, or worn parts of the device. • Always start the new season with fresh fuel in the correct petrol-oil ratio. © by WilTec Wildanger Technik GmbH Item 61955 Page 17 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 18 Wrong carburettor mixture Have carburettor adjusted by au- thorised service. Incorrect fuel mix ratio Use properly mixed fuel. Choke lever in half position Vary position of choke lever. © by WilTec Wildanger Technik GmbH Item 61955 Page 18 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 19 This logo indicates that this electric equipment must not be disposed with the domestic waste. The company WilTec Technik GmbH has been registered in the German registry EAR under the WEEE- registration number DE45283704. Disposal of used electrical and electronic appliances...