Step Four; Step Five - Zuiver BARBIER CONSOLE TABLE Quick Start Manual

Step Four

Before drilling, ensure the size of hole will be correct to fit your wall fixing (not included).
Warning: Ensure the area to be drilled is free from hidden electrical wires, water and gas
pipes.
Mark the hole position shown below and drill using a masonry bit. Push the wall fixing into position.
With a screwdriver secure the plastic loop bracket (part H) to the wall using the washer (part G) and
screw (not included).
!!*
G
!!
H
!!*
!!* Fittings not included

Step Five

Locate the cable tie (part I) as shown below. Push the cabinet back towards the wall and into position.
Pull the cable tie (part I) tight.
I
I
03/16 5