Step By Step Assembly Instructions - Zuiver BARBIER CONSOLE TABLE Quick Start Manual

Step by step assembly instructions

Step One
With 2 people, carefully place the cabinet (part A) upside down on a soft, flat surface near where the
unit will be used. Locate the support rail (part C) and secure using the allen bolts (part E) and allen
key (part D).
Locate the legs (part B) and tighten by hand as shown below. Ensure all legs and bolts are fully
tightened before use.
B
Step Two
With 2 people, carefully turn the console over and place in position.
03/16
D
E
C
Please take care when lifting, this unit
is very heavy! Do not drag the unit
when moving, must be lifted to
prevent damaging the legs!
A
CAUTION!
3