Page 1
Thank you for purchasing this Side Table Kobe. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. Pre-assembly preparation Please ensure instructions are read in full before attempting to assemble this product. People to assemble Tools required Please check the pack contents before attempting to assemble this product.
Page 2
Fittings and parts checklist Parts checklist Table top Leg 1 Leg 2 Fitting checklist Metal bracket Allen bolt Grub screws M6x15mm M4x20mm Felt pad Allen key #4 Allen key #3 MOOSID-CNLM-02/23...
Page 3
Step by step assembly instructions Step One With 2 people, carefully place the table legs (part B, part C) on a soft flat surface near where the unit will be used. Locate the leg 1 (part B) and the leg 2 (part C) as shown below. Step Two Locate the metal bracket (part D) as shown below and secure using the bolts (part E) and allen key (part H).
Page 4
Step by step assembly instructions Step Three With 2 people, carefully turn the wood base over. If the product will be placed on a hard floor, we advise applying the felt pads (part G) to the bottom of the legs to prevent damage to the floor and the product.
Page 5
Step by step assembly instructions Step Five Carefully locate the grub screws (part F) as shown below. Tighten using the allen key (part I) by turning clockwise. Repeat for all 4 bosses on the glass top. 10 KG MOOSID-CNLM-02/23...
Care and Maintenance Wood furniture • Wood displays different grain patterns depending on which way they cut - for example, the ‘medullary rays’ which can appear is a mark of good quality timber - these are just characteristics of the natural beauty of the wood.
Page 7
Experiencing problems with your new product? Before calling customer service, please have your item’s batch code ready. You can find the batch code on the back or bottom of your product as below shown. (example batch code: 190510) Batch Code Placement MOOSID-CNLM-02/23...
Need help?
Do you have a question about the Kobe Side Table and is the answer not in the manual?
Questions and answers