Extreme Networks ExtremeSwitching 3600 Series Installation Manual page 36

Installing the Switch
LED
PWR
Status
UP/Down
Base
Table 11: Shared SFP transceiver Port LED state indicators
Label
In Use
LNK/ACT
February 2020
State
Off
Green (Solid)
Off
Amber (Solid)
Green (Solid)
Off
Amber (Solid)
Green (Solid)
Off
Amber (Solid)
Green (Solid)
Green (Blinking)
Color/Status
Green/steady
Off
Green/steady
Green/blinking
Green/slow blinking
Off
Installing Ethernet Routing Switch 3600 Series
Description
The unit power is off.
Normal operation.
System cannot work properly
(like temperature is too high).
The system failed self-test.
Normal operation.
No Stack-up or Stack-down
connection is detected.
A Stack-up or Stack-down
cable is detected, but
adjacency has not been
completed.
The unit has formed a neighbor
with an adjacent unit over the
Stack-up or Stack-down cables.
The unit is operating in a
standalone mode, or not the
stack base unit.
The unit is operating as the
Temporary Base Unit.
The unit is operating as the
Base Unit for the designated
stack.
There is a stack configuration
error. Either multiple base units
or no base unit is configured in
the stack.
Description
The port has a link established.
The port does not have a link
established.
This link is operating normally.
There is activity on the port.
The port has been disabled by
the software.
Indicates that the link has been
lost.
36