Extreme Networks ExtremeSwitching 3600 Series Installation Manual page 22

Installation Preparation
Procedure
1. Plug the female end of the AC power cord into the back of the switch power supply.
Important:
The switch powers on immediately when it is connected to a suitable AC power source.
The switch does not have a power switch.
2. Plug the male end of the AC power cord into a suitable AC power outlet.
Important:
Ensure you only use an appropriately rated AC power cord. Do not use an extension
cord.
Warning:
The only way to turn off the switch is to disconnect the power. Always connect the AC
power cord in a location that can be reached quickly and safely in case of an emergency.
February 2020 Installing Ethernet Routing Switch 3600 Series 22