Using The Parking Brake; Locking The Front Wheels - JANE Kendo Manual

It is possible to remove the seat if you want to fold the pushchair
up smaller and make it easier to manoeuvre
Unfasten the handlebar levers and slide it downwards.
Turn the right handle a and pull both side catches lifting the
5
handlebar upwards to make it easier to unlock.
Lift the pushchair by the handle on the central tube of the chassis
until the pushchair is fully folded
the carry strap found on the handlebar.
For it to fold up as small as possible, the seat of your KENDO
should be fitted in the forward facing position on the chassis
and the hood should be fully folded
as before.
WARNING: You must make sure that the child is kept at a
!
safe distance during the folding and unfolding operations.
Sharp points and areas where fingers could get trapped are
inevitable during these operations.
D. USING THE PARKING BRAKE
BRAKE: Press the lever downwards with your foot to put the par-
king brake on your pushchair.
26
EN
IM 2043_KENDO inst ALTA.indd 26
.
10
12 a-12 b-12
b
5
a- b and then secure it with
6 6
b
3
9
c. Follow the same steps
16
a
7
RELEASING THE BRAKE: Use your foot to press the lever upwards,
to take the parking brake off.
c
WARNING: When the brake is on make sure that the push-
!
chair has braked correctly. It may be necessary to push the
pushchair slightly for the brake to be fully activated.
E. LOCKING THE FRONT WHEELS
Your pushchair is fitted with front swivel wheels that can be locked
b if you prefer.
To lock them, press the button catch found above each front whe-
el set. a
8
To unlock the front wheels, pull the button upwards.
WARNING: Keep the swivel axle free from dust to ensure a
!
smooth, long-lasting swivel action.
a
7
b
8
19/7/18 21:26