Setup Instructions - GENDRON 3648 Owner's Operation Manual

Setup Instructions

To Assemble:
Step 1. Lock head & foot end casters parallel to
frame & oriented as shown.
Step 2. Move bed into position as shown and hook
the foot end frame over the round bar on
the head end frame.
Step 3. Swing lift handle out and slowly lower bed.
Keep both hands on handgrips until bed
has been completely lowered to reduce the
risk from pinch areas.
Step 4. Insert quick release pins on both sides of
frame.
Step 5. Connect both actuator cables from foot
end of frame to head end of frame.
HOMECARE BED
8
Step 1
Step 2
Step 4
Step 5