Upright Back Position; Siderail Adjustment - GENDRON 3648 Owner's Operation Manual

Operating the Bed

Upright Back Position

The Backrest stops at any angle between 0 degrees (horizontal) position and an upright
position of about 50 degrees.

Siderail Adjustment

Side rails are located on each side of the bed. Side rails have a 3-position vertical
adjustment.
To raise or lower side rail, grab top section of rail with one hand while pulling the Release
Knob with the other hand. Pull side rail up or down as required. Allow the Release Knob
to spring back into locked position.

Before operating the backrest always ensure that casters are locked.
Otherwise an accident or injury may occur.



HOMECARE BED
Release Knob
12