GENDRON 3648 Owner's Operation Manual page 10

Setup Instructions
To Disassemble:
Step 1. Completely lower bed and all bed sections.
Step 2. Lock head & foot end casters parallel to
frame & oriented as shown.
Step 3. Disconnect both actuator cables from foot
end of frame to head end of frame.
Step 4. Remove quick release pins on both sides
of frame.
Step 5. Swing lift handle out and slowly lift bed.
Keep both hands on handgrips until bed
has been completely lifted to reduce the
risk from pinch areas.
Step 6. Lift foot end frame away from head end
frame.
HOMECARE BED
Step 1 & 2
Step 3
Step 4
Step 5 & 6
9