Actuators, Control & Handset - GENDRON 3648 Owner's Operation Manual

Actuators, Control & Handset
Bottom View of Bed
LINEAR ACTUATORS
The bed is equipped with 24V DC Linear Actuators
designed with built in travel limit switches. Each actuator
is equipped with quick release pivot pins (3/8" x 2") on both
ends. If disassembled retain pivot pins and hairpin clip.
CONTROL MODULE
The Control Module is designed to control all actuators in
the system. The Control Box mounts directly on one of the
actuators as shown.
HANDSET
The Handset is used to control all actuator functions. When
not in use, Handset hooks on the top of the siderail.
NOTE:
Before removing connectors from control module for any
reason, disconnect the power cord.
connectors are fully plugged in before closing cover on
control module when finished.
Cover
Release
GROUND WIRE
Green wire from power cord connects
to bed frame. Secure with screw and
star washer.
Assure that all
13
HOMECARE BED
Mounting Bracket
Power Cord w/
Green Ground Wire
Green Power-on Light
Glows when Power Cord
Is plugged into 120V outlet
CONTROL MODULE
WIRING DIAGRAM
Actuator
Control Module