GENDRON 3648 Owner's Operation Manual

GENDRON 3648 Owner's Operation Manual

Bariatric homecare bed

Advertisement

GENDRON
BARIATRIC HOMECARE BED
Model: 3648
Owner's Operation Manual
Gendron, Inc.
520 W. Mulberry Street – Suite 100
Bryan, Ohio 43506
PHONE (800)-537-2521

Advertisement

Table of Contents
loading

Summary of Contents for GENDRON 3648

  • Page 1 GENDRON BARIATRIC HOMECARE BED Model: 3648 Owner’s Operation Manual Gendron, Inc. 520 W. Mulberry Street – Suite 100 Bryan, Ohio 43506 PHONE (800)-537-2521...
  • Page 2: Table Of Contents

    HOMECARE BED Table of Contents Parts Locator ......................2 Safety Notes ......................3 Intended Use & Product Description ............... 5 Function & Basic Operation ..................6 Assembly Instructions ....................7 Setup Instructions ..................... 8 Operating the Bed ....................11 Steering the bed ....................11 Locking the Casters .....................
  • Page 3: Parts Locator

    HOMECARE BED Parts Locator Siderail Head Board Back Rest Leg Lift Foot Board Brake Caster Siderail Release Pin Lift Handle I.V. Socket Steer Caster Pinch points Keep fingers, arms, legs, and objects clear of bed when any mechanism is in motion. Make sure all persons and objects are clear of the bed when raising or lowering.
  • Page 4: Safety Notes

    HOMECARE BED Safety Notes      Always raise the siderails whenever the patient is lying on the bed in supine position.  Always lock all casters and align parallel to the patient before use.  Take special care to lock the casters securely when articulating the bed or when transferring the patient to or from the bed.
  • Page 5  Do not use a bed with any missing or damaged parts. Never disassemble your Bariatric bed. If problems are found, contact Gendron customer service at 1-800-537-2521 or your local authorized Gendron dealer.
  • Page 6: Intended Use & Product Description

    HOMECARE BED Intended Use & Product Description 3-Function Homecare Beds are designed for bariatric patients. The bed is ideal for long term use in the home or nursing care centers. It is intended for all age groups with varying medical and physical conditions. Total safe working load of the bed is 650 pounds. THREE 3-FUNCTIONS 1) Raise and lower head 2) Lift and lower leg and foot section...
  • Page 7: Function & Basic Operation

    HOMECARE BED Function & Basic Operation The 3-Function Homecare Bed has electric drive actuators to operate the back rest, the leg lift, and to raise and lower the bed. To control the positioning on these beds use the 6-button, 3-function handset. These beds do not have the Trendelenburg or reverse Trendelenburg feature.
  • Page 8: Assembly Instructions

    HOMECARE BED Assembly Instructions 1. Install the headboard posts in the square sockets provided at the head end with the board closest to the mattress as shown below. 2. Install the footboard posts in the square sockets provided at the foot end with the board away from the mattress as shown below.
  • Page 9: Setup Instructions

    HOMECARE BED Setup Instructions To Assemble: Step 1. Lock head & foot end casters parallel to frame & oriented as shown. Step 1 Step 2. Move bed into position as shown and hook the foot end frame over the round bar on the head end frame.
  • Page 10 HOMECARE BED Setup Instructions To Disassemble: Step 1. Completely lower bed and all bed sections. Step 2. Lock head & foot end casters parallel to frame & oriented as shown. Step 1 & 2 Step 3. Disconnect both actuator cables from foot end of frame to head end of frame.
  • Page 11 5. Position the side rails. Be sure they slide up and down properly. 6. When you are satisfied that the bed is operating properly, instruct all personnel who may be involved in the bed operation. If problems are found, contact Gendron customer service at 800-537-2521 or your authorized Gendron dealer...
  • Page 12: Operating The Bed

    HOMECARE BED Operating the Bed Steering the bed The Bed can be steered in two modes, with the steering locked or with all four casters able to move independently. The two casters on the foot end are the “steer” control type (page 2).
  • Page 13: Upright Back Position

    HOMECARE BED Operating the Bed Upright Back Position The Backrest stops at any angle between 0 degrees (horizontal) position and an upright position of about 50 degrees.  Before operating the backrest always ensure that casters are locked. Otherwise an accident or injury may occur. Siderail Adjustment Side rails are located on each side of the bed.
  • Page 14: Actuators, Control & Handset

    HOMECARE BED Actuators, Control & Handset Mounting Bracket Actuator Bottom View of Bed Control Module Power Cord w/ Green Ground Wire Green Power-on Light Glows when Power Cord Is plugged into 120V outlet LINEAR ACTUATORS The bed is equipped with 24V DC Linear Actuators designed with built in travel limit switches.
  • Page 15: Diagnostic & Repair

    If yes, replace the damaged motor damaged? cable. 6. Is the control module chirping? If yes, call Gendron Customer Service. Actuator not functioning 1. Is motor cable plugged into actuator and Plug motor cable into actuator and control module? control module.
  • Page 16: Cleaning & Maintenance

    HOMECARE BED Cleaning & Maintenance  Before cleaning any portion of bed, disconnect power cord from the wall outlet. Do not  use a power washer to clean bed.  Before using any cleaning product, test it on the underside of the bed. Never use any volatile or flammable fluid (thinner, gasoline, etc.) that could cause discoloration or ...
  • Page 17: Specifications

    HOMECARE BED Specifications Product name: Gendron Bariatric Homecare Bed Model: 3648 650 LB. CAPACITY Dimensions: Maximum Overall Width 51” 48” Pan Width 90” with headboard and footboard installed Overall Length 84” Pan Length Mattress Pan Height Above floor, adjusts from 15" to 32"...
  • Page 18 HOMECARE BED Specifications ENVIRONMENTAL CONDITIONS Operating Temperature 5°C to 40°C (40°F to 105°F) 20% to 90% @ 30°C (85°F) – not condensing Relative humidity Atmospheric pressure 700 to 1060 hPa (20.67 to 31.30 inHg) Storage and Transport Temperature -10°C to +50°C (15°F to 120°F) 20% to 90% @ 30°C (85°F) –...
  • Page 19: Warranty

    Gendron, Inc. warrants the bed frame to be free from defects in materials and workmanship for a period of five (5) years from date of purchase. Wear items including, but not limited to: casters, actuators, control module, handset, power cord, cables, bearings, pins, release knob, and mattress are warranted to be free of defects in material and workmanship for a period of one (1) year.

Table of Contents