Channel Preset Menu; Number Of Presets; Preset Adjust - Zaxcom URX50 User Manual

Zaxcom URX50

CHANNEL PRESET MENU

Number of Presets

NUMBER OF
PRESETS: 31
From this menu the number of presets that the URX50 will display can be selected. The URX50 can have up to 31
presets.

Preset Adjust

PRESET 1: 524.3
TX NAME
From this menu each preset frequency can be adjusted by pressing the CH UP and CH DOWN keys. If the
frequency has a corresponding transmitter that is on the name of the transmitter will be displayed.
Each preset can be toggled on and off by pressing the POWER/TC key. When the preset is ON the user will be
able to cycle to that preset and listen to it, if the preset is OFF the user will not be able access that preset.
After the frequency is set press the MENU key to advance to the next preset.
Please note the number of available frequencies will be determined by the number of presets that was set in the
previous menu.
It is important to note that when using the URX remote preset number 1 will need to be set to the frequency of
the TRXCL3 that is supplying the data to the URX50.
(ON)
11
Frequency Presets