Avocent DSR Series DSR1021 Release Note page 2

DSR®1021, 1022, 1024 Switch Appliances
Release Notes – July 6, 2005
If the DSR switch appliance is not configured, the IP address must be entered using the console CLI port. Once
the DSR switch appliance is configured, it is accessible by entering its IP address into an Internet browser's
address bar.
The internal web interface utilizes local user accounts for authentication. The default username is "Admin" and
no password.
===============================================================================
Fixes
===============================================================================
This release of DSR switch appliance contains the following fixes:
1. Not applicable
===============================================================================
Known Issues
===============================================================================
This release of DSR switch appliance contains the known issues:
1. Not applicable
===============================================================================
Notes
===============================================================================
The following notes are applicable to this release:
DSR1021 –
1. Appliance is supported using DSView 2 or DSView 3 Software. If you are using DSView 2 or DSView 3,
please go to the respective product page under Avocent support for the latest firmware.
th
2. As of July 13 , 2005, the DSR1021 appliance will only ship with DSView 3 firmware code.
DSR1021, 1022, 1024 –
1. Appliances migrated to DSView 3 are now supported with direct IP access or DSView 3 software.
7/7/2005 Page 2 of 2