Closing The Cover - Master Spas axis Installation & User Manual

CLOSING THE COVER

Standing at the 8' end where the rolled cover is located,
push the rolled cover across the surface of the swim spa,
unrolling until out of reach.
On the 8' end where the rolled cover was located, place the
cover lever arm edge (Figures 16 & 17) into Lever Channel (b)
mounted to the swim spa skirt. Push down on cover lever
arm (Figure 18) and turn Rotating Lever Latch to secure it
(Figure 19).
Moving to the long side of the swim spa, grasp the grey
insulating bag portion of the cover and continue unrolling
until fully closed (Figure 13, page 11). Then, grasp the bottom
grey insulating bag and its handles to center the cover on
the swim spa and pull it taut.
Cover lever arm, shown
without the vinyl
12
b.
FIGURE 16
FIGURE 17
Cover lever arm,
shown with the vinyl