4. Set up the debugging environment by doing one of the following:
entering the data required (see table below). You can save these settings for future use by
•
clicking on Save Folder Data
reverting to the default settings, by clicking Reset to Default
•
inputting data from a saved folder by selecting Load Folder Data
•
Use Remote
Check this box if you are using a speech recognizer on a remote server; leave
Debugging
unchecked if you are using a recognizer on the local server
Remote Server
Address or name of the server on which the recognizer is running
Address
Remote Server
Port number of the remote server
Port
Local Server
Address or name of the machine on which the SAB Configurator is running
Address
Local Server Port
Port number of the local server
Render Style
Select the style in which VoiceXML is presented from the drop-down list
Audio Channel
Select telephony card setting from the drop down list
Name
Language
Select language (see page 14) from the drop-down list
Defaults to English.
Persona
Select persona (see page 14) from the drop-down list
Save Settings
Check to save the settings.
Speech Applications Builder Configurator User Guide • May 15, 2004 • page 103 of 116