Last Number Dialed; Leave Word Calling (Lwc) - AT&T Definity 8102 User Manual

Last Number Dialed

To automatically redial
the last number you
dialed (extension
outside number, or
trunk/feature code)

Leave Word Calling (LWC)

To leave a message
after dialing an
extension (when call is
not answered, you hear
a coverage or busy
tone, or you have been
put on hold)
To leave a message
without ringing an
extension
1
Dial Last Number Dialed code (while off-hook)
Number is automatically dialed (up to 20 digits)
Note: Available with DEFINITY Generic 2 and System
85 R2V4 and some R2V3 systems. Check with your
System Manager to learn if the feature is available on
your system.
Limitations on this feature should be noted. Digits
dialed via Abbreviate Dialing feature dial codes,
authorization codes, and Station Message Detail
Recording (SMDR) account codes are NOT retained in
memory and must be redialed for each call.
1 Press [
FLASH
2
Dial Leave Word Calling code
3
Dial extension
Message light on called voice terminal goes on (if so
equipped)
Note: If reorder tone is heard, message is not stored;
try again.
1 Did Leave Word Calling code
2 Dial extension
Message light on called voice terminal goes on (if so
equipped)
3 Hang up
]
[recall dial tone]
[dial tone]
[confirmation tone]
[dial tone]
[confirmation tone]
2 5