Mute (For 8110 Users) - AT&T Definity 8102 User Manual

Mute (for 8110 Users)

To prevent the other
party from hearing you
(to mute microphone)
To resume talking to
the other party (to turn
on speakerphone
microphone, or handset
again)
Programmable Dialing Buttons
The 12 programmable dialing buttons are provided for one-touch dialing of frequently
dialed telephone numbers. You can also store emergency numbers, such as 911, and
feature codes on these buttons.
Shipped with each telephone is a button designation card on which you can write the
names, numbers, or codes stored on each of the Programmable Dialing buttons. Use
the procdure directly below to remove the plastic cover on the front of your
telephone and place the designation card under it.
Note: You can program up to 20 digits and characters (such as a pause, "#", or "*") on
a programmable dialing button. If the number you want to store is longer than 20
digits and characters, you can do one of the following:
Store up to 20 digits and characters on one button; store the remainder of the digits
and characters on a second button. To place a call using these buttons, press the
first button; when all of the digits and characters have been dialed, press the second
button in the sequence.
Store up to 20 digits and characters on one button; dial the remainder of the digits
and characters manually.
1 Press [
]
MUTE
Red light next to [
Other party cannot hear you
1 Press [
]
MUTE
Red light next to [
2 Resume conversation with the other party
] goes on
MUTE
] goes off
MUTE
12