Auto Answer (For 8110 Users) - AT&T Definity 8102 User Manual

Auto Answer (for 8110 Users)

To have your telephone
automatically answer a
call
Note: For this feature
to operate properly on
your switch, your line
must be administered
as "data restricted."
Also, for your
information, the Auto
Answer button is
removable and can be
replaced by a flat cap
(packed in the box with
8110 terminal). If the
button is removed, the
Auto Answer feature is
disabled.
To turn off the Auto
Answer feature
1
While handset is on-hook, press [
Button released to the "up" position
Colored area under button will remind you that the
Auto Answer feature is active
When a call comes in, the built-in speakerphone on
2
your telephone is automatically activated
Both you and the other party hear a short ring and
then a burst of tone to indicate that the call has been
answered
Red light next to [
3
Speak to caller
4
When caller ends the call, 8110 telephone hangs up
automatically
o r
You can press [
The 8110 telephone is now ready for next Auto
Answer call
1 Press [
]
AUTO
Button reverts to "down" position (you can no longer
see the color around the button)
AUTO
] goes on
SPKR
] to end the call
SPKR
]
1 0