Appendix A
Using the Data Collection Dialog Box
The Data Collection dialog box allows you to configure the way in which
information is collected. If you make the polling interval smaller you
receive more accurate data at the expense of using more network and
agent resources. The objective is to use the ideal polling interval that
provides accurate data using minimum resources.
To open Data Configuration:
78
1. Click
.
Or
Select
Configuration > Data Collection
box opens.
Figure A-12. Data Collection Dialog Box
2. Configure the data parameters as follows:
—
Polling Interval
- Specifies the sampling interval, in seconds. A
small interval instructs SMON to receive data frequently from
the agent while a large interval receives data less frequently.
The default interval is 30 seconds.
—
Storage Buckets
the application saves data for use by reports and for display.
For example, if the polling interval is set to 30 seconds and
storage buckets to 100, then the application saves data related
to the last 50 minutes (100 buckets * ½ minute).
When all storage buckets are full, old data is deleted to free space
for new data.
3. Enter the values for the data collection.
4. Click
.
OK
. The Data Collection dialog
- The number of sampling intervals for which
Avaya M770 and M-MLS SMON User Guide