Machine Identification; Use Of The Machine - Benassi MC2300 Reverso Instruction And Maintenance Manual

SpA
ALSO AVAILABLE:
•
Transf er wheel unit cod. 97063000.
•
Iron wheel torque Ø 370 x 100 cod. 97063100.
•
Iron wheel torque Ø 370 x 50 cod. 97063200.
•
Front ballast Kg. 10 cod. 98061200.
•
Coupler head cod. 91063400.
•
Wheel spacer torque cod. 94961800.
On the m achine, equipment and this m anual there are symbols, writings and
directions accom panied by this sign: it suggests the presence of a potential
danger. Pay attention when you see it, read carefully and keep to what it says.
Do not remove or make the decalcomania's present on the machine unreadable.
It is obligatory to clean them when dirty and immediately change them if detached or damaged.
The machine identif ies itself with the type and part number of the gearbox. The part number of the engine is stamped (when
it exists) by the producer on the plate of the engine itself or on the engine case. Identif ication data of the machine are carried
f orward on a plate placed on the machine.
Report the label's data of the machine on the label's facsimile in order to hav e them always close at hand when necessary.
The machine illustrated in this manual has been made only to be used in agriculture and mostly for the ground milling.
Any use out of this agricultural one is considered an improper one.
The producer disclaims all responsibility for damages or injuries resulting f rom the improper use of the machine.
The respect of the working conditions, maintenance and repairs established by BENASSI SPA, according to the rules, are
also part of the machine use.
The machine can be used, subjected to maintenance and repaired only by someone who has prev iously read this manual
and has been inf ormed about its eventual dangers.
Any alterations made on the machine excludes responsibility byside of the BENASSI SPA f or the resulting damages.
6 -ACCESSORIES
Mowing unit
cm.
38-48
Cod. 94761600
Cutting unit cm. 92 with special
cutterbar and spare blade
Cod. 94564600
Snow turbine cm.50
single-stage
Cod. 97561200
Single-blade lawn mower cm.52
Cod. 96660600
Weight for mowing bar (only for
v ersion with Y ANMAR engine)
Cod. 98061400
7 -SYMBOLS and DECALCOMANIA'S
8 –MACHINE IDENTIFICATION
9 –USE OF THE MACHINE
Picture 3
MC 2300
Wheels torque 3.50.6
Cod. 97063300
Wheels torque 13.500.6
Cod. 97063400
Plough
Cod. 91062500
Lister with arm
Cod. 91063500
Front-end leveller
Cod. 97561100
Kit f or wheels torque 3.50.8
Cod. 97063500
5