SNMP Module
Modifying Parameters
To modify parameters of an extender unit, proceed as follows:
1. Read the extender unit parameters (see chapter 5.6.3, page 55).
2. Modify the parameters.
3. Click the Transmit button.
A query for transmission appears.
4. Click the Yes button to transmit the modified parameters to the extender unit.
The progress of the parameter transmission is displayed.
5. Click the Close button when the parameter transmission is completed (green).
Management software menu Extender & Devices - EXT Units - transmission finished
Fig. 40
The parameter transmission is finished.
6. Click the Deactivate Edit Mode menu item in the toolbar.
Configuration via Management Software
57