Ihse 474-SNMP User Manual page 39

SNMP Module
Multicast
Field
Multicast
Network Services
Field
API Service
SSL Support
To set parameters for the network configuration, proceed as follows:
1. Select System Settings > Network in the task area.
2. Click the Activate Edit Mode menu item in the toolbar.
3. Modify the desired settings.
4. Click the Apply button to confirm your entries.
5. Click the Deactivate Edit Mode menu item in the toolbar.
If no access to the SNMP module is possible because the IP address has been forgotten, the SNMP
module can be reset to the factory settings via jumper (see chapter 9.2, page 99).
Entry Description
Byte Input of the multicast address, if using within a multicast group
(default is: 255.255.255.255 (broadcast))
Entry Description
Activated LAN interface at the SNMP module activated for access via
management software (API service port 5555)
Activated Activate SSL encryption for API, management software API,
management software and SNMP module communication
Deactivated Function not active (default)
Configuration via Management Software
39