Ihse 474-SNMP User Manual page 41

SNMP Module
To set parameters for the syslog function, proceed as follows:
1. Select System Settings > Network in the task area.
2. Click the Activate Edit Mode menu item in the toolbar.
3. Select the Syslog tab in the working area.
4. Modify the desired settings.
5. Click the Apply button to confirm your entries.
6. Click the Deactivate Edit Mode menu item in the toolbar.
Setting the syslog options
To set or activate the presetting, proceed as follows:
1. Select Extras > Options in the menu bar and open the Syslog tab.
2. Enter the appropriate data.
3. Click the Ok button to confirm your entries.
4. Close the management software and restart it.
Management software menu Extras - Options - Syslog
Fig. 29
The following options are available:
Option
Log File Directory
Log File Name
Log File Extension
Daily Logfiles
Maximum Log File
Size [KB]
Description
Default directory to store the log files
Default name of the log file
Default extension for the log file
Log files are stored every 24 hours (daily)
Allowed maximum size of log file
Configuration via Management Software
41