Table of Contents
Advertisement
SNMP Module
3
Description
3.1
Intended Use
The SNMP module is used to monitor all function- and safety-critical components of those KVM extenders
that have been installed in the same chassis as the SNMP module. In addition, the SNMP module can be
used to query the status of the KVM extenders, update the firmware of the extenders, and make and query
settings of the extenders. Possible settings are parameters, USB HID or the EDID.
Possible radio interference in a domestic environment
This is a Class A product. In a domestic environment, this product may cause radio interference in which
case the user may be required to take adequate measures.
Follow the safety and installation instructions given in this manual.
Use connection cables according to the specifications for the length and type given in this manual.
3.2
Access Options
You have following options to configure and operate the KVM Extender.
Access option
Draco tera-Tool
The management software is used for the Draco tera Matrices as well as the SNMP modules and has more
functions than is required for the management of the SNMP modules.
This manual explains all the functions that are required for the SNMP modules. Information on additional
functions can be found in the manual for the Draco tera Matrices of the series 480.
Description
The Draco tera-Tool (management software) is available as a single executable
program file (desktop and app version) that does not require a separate
installation. The management software can be downloaded from the link
https://www.ihse.de/software.
Advanced settings can be configured on the KVM extender operating system
using the management software:
•
Advanced configuration
•
Extended monitoring options
•
System update (firmware update)
Local backup option.
•
NOTICE
Description
11
Advertisement
Chapters
Table of Contents
