Recording From External Equipment - Samsung DVD-R130 Instruction Manual

Recording from External
Equipment
Before you start
Check that the disc has enough available space for the
recording. Adjust the record mode.
1
Press the OPEN/CLOSE button, and place a
recordable disc on the disc tray.
2
Press the OPEN/CLOSE button to close the disc tray.
Wait until "LOAD" disappears from the front panel
display.
If an unused DVD-RW disc is inserted, the message
"Uninitialized Disc Do you want to initialize this disc?" will
appear (See page 44)
3
Press the INPUT SEL. button to select the input
source according to the connection you made.
The front panel display changes in the following
sequence:
© Channel Number © AV1 © AV2 © DV
If you've connected a digital camcorder, press the
INPUT SEL. button to select DV. (See page 48)
4
Press the REC MODE button repeatedly, (or press
the REC MODE button and then press the ... ... † †
button) to select the recording speed(quality).
© SP © LP © EP © XP
Record Mode XP (01:11)
5
Press the REC button.
To stop recording
Press the STOP ( ) button to stop or finish
recording in progress.
• When using DVD-RW/DVD-R discs, the message
'Updating the information of disc. Please wait for a
moment.' is displayed.
You can not change the record mode and
s
input source during recording.
NOTE
Recording will stop automatically if there is
s
no free space left for recording.
Up to 99 titles can be recorded onto a
s
disc.
Recording will stop automatically if a copy
s
protected image is selected.
DVD-RW discs must be formatted before
s
starting to record. Most new discs are sold
unformatted.
Do not use DVD-R authoring discs with
s
this unit.
English - 47