Initial Setup; Osd Language Setup; Clock Set - Samsung DVD-R130 Instruction Manual

Hide thumbs Also See for DVD-R130:
Table of Contents

Advertisement

Available languages

Available languages

Initial Setup

If you connected an external Audio System, turn on your
Audio System and select AUX, CD or DVD.
The OSD (On-Screen Display) displayed on the screen
may vary depending on conditions such as the disc type
and whether the disc has been inserted or not.

1. OSD Language Setup

After plugging in the recorder, the first time you press the
POWER button, the screen shown below appears.
1
Press the POWER button.
Press 1 for English
Touche 2 pour Français
Pulse 3 para Español
MACROVISION DS01
2
Press a number button to select the language.
If the language for the startup screen is not set,
s
the settings may change whenever you turn the
power on or off. Therefore, make sure that you
NOTE
select the language you want to use.

2. Clock Set

This menu is used to set the current time. You need to
set the time first to use timer recording.
You must have the antenna/cable connected to
set the Auto Clock. See pages 15~17 for
Antenna connections(Method 1, 2 and 3).
Method 1 or 3
If you have the antenna connected via Method 1 or 3 on
pages 15,17, the DVD Recorder automatically sets the
clock by searching for a channel that carries a time
signal and sets your time zone and daylight saving(if
applicable).
Method 2
If you have the antenna connected via Method 2 on
page 16, you have to set the clock manually.
See "Manual Clock set" on pages 30.
Auto Clock Set
1
With the unit in Stop mode/No Disc mode, press the
MENU button.
DVD-Recorder
No Disc
Timer Rec.
Timer Record
Setup
Scheduled Record List
MOVE
ENTER
Select Setup using the ...† buttons, then press the
2
ENTER or √ button.
DVD-Recorder
No Disc
Timer Rec.
System
Setup
Clock Set
Channel Set
Language
Audio
Video
Parental Control
MOVE
ENTER
Select Clock Set using the ...† buttons, then press
3
the ENTER or √ button.
Clock Set menu will be displayed.
DVD-Recorder
No Disc
Auto Clock Set
Timer Rec.
Manual Clock Set
Setup
MOVE
ENTER
Select Auto Clock Set using the ...† buttons, then
4
press the ENTER or √ button.
The Menus are slightly different depending on
s
whether a disc is inserted or not. The menus
NOTE
described on the next few pages are with no
disc in the unit.
The menus are not available during playback
s
or recording.
Timer Record
√ √
√ √
RETURN
EXIT
Setup
√ √
√ √
√ √
√ √
√ √
√ √
√ √
RETURN
EXIT
Clock Set
√ √
√ √
RETURN
EXIT
English - 29

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Dvd-r130k

Table of Contents