Select one of the following three types of connections: Antenna + DVD Recorder + TV : No Cable Box Antenna + Set-Top Box or VCR + DVD Recorder + TV : No Cable Box Antenna + Cable Box + DVD Recorder + TV The VHF/UHF RF OUT jack of this product sends only signals received through the antenna.
Antenna + Set-Top Box or VCR + DVD Recorder + TV : No Cable Box DVD Recorder Antenna + Cable Box + DVD Recorder + TV DVD Recorder Connect the signal source to the STB or VCR Use a TV antenna or coaxial cable to connect the signal source coming from the antenna or wall to the VHF/UHF RF IN jack on the STB or VCR.
…/† buttons, then press the √ or ENTER button. The DVD Recorder automatically sets the clock by searching for a channel that carries a time signal and sets your time zone and daylight saving(if applicable). If your clock is set to the wrong time zone or daylight saving, you can adjust these settings without turning off the Auto Clock Set function (see page 24).
Channel Set With the unit in Stop mode, press the MENU button. Select Setup using the …/† buttons, then press the √ or ENTER button. Select System using the …/† buttons, then press the √ or ENTER button. Select Channel Set No Disc using the …/†...
Wait! Make sure you complete Step with The following instructions will give you a quick overview about how to use the DVD Recorder. Formatting a Disc Recording the current TV program you are watching Making a Timer Recording Finalizing a Disc...
Finalizing a Disc After you record programs onto a DVD-RW/DVD-R disc with your DVD recorder, it needs to be finalized before it can be played back on external devices. Press the MENU button with the disc stopped.