Table of Contents
Advertisement
Remove the heat sink:
1.
Remove the four Phillips M2.0 × 4.0 screws (1) that secure the heat sink to the system board.
2.
Remove the heat sink (2).
Each time the heat sink is removed, thoroughly clean the thermal material from the processor component (1)
and the surface of the heat sink (2). Replacement thermal material is included with the heat sink and system
board spare part kits.
Reverse this procedure to install the heat sink.
Top shield
To remove the top shield, use this procedure and illustration.
Table 6-11
Top shield description and part number
Description
Top shield (includes wireless antenna)
ENWW
Spare part number
M24725-001
Component replacement procedures
39
Hide quick links:
Advertisement
Table of Contents
