HP Chromebox G3 Maintenance And Service Manual page 38

Before removing the memory module, follow these steps:
1. Prepare the Chromebox for disassembly
2. Remove the bottom cover
3. Remove the I/O side frame
4. Remove the bottom shield
Remove the memory module:
1. Insert a case utility tool or similar thin, plastic tool into the openings (1) on either side of the memory
module shield and remove the shield (2). The memory module shield is available using spare part number
L17264-001.
NOTE:
the retention clips (3) built into the system board.
34 Chapter 6 Removal and replacement procedures for authorized service provider parts
(Bottom cover on page
(I/O side frame on page
(Bottom shield on page
When installing the memory module shield, be sure that the edges of the shield fit securely into
(Preparation for disassembly on page
27).
28).
29).
27).
ENWW