Arm Eject Lever, Case Deck Assembly, And Top Shield Assembly (Hp Authorized Support Providers Only); Figure 3 - Arm Eject Lever, Case Deck Assembly, And Top Shield Assembly - HP OmniBook 5000 Familiarization Manual

Arm Eject Lever, Case Deck Assembly, and Top Shield Assembly
(HP Authorized Support Providers Only)
Case Deck Assembly:
1. Remove the two screws shown in Figure 3.
2. Remove the Arm Eject Lever by gently pulling the front plastic guide forward and lifting the
lever away to the left.
3. Reverse the above steps to reassemble.
Top Shield Assembly:
1. Remove the four screws shown in Figure 3.
2. Slide the Top Shield Assembly forward to remove.
3. Reverse the above steps to reassemble.
Screw 6-32
L=0.250
Arm Eject Lever
Case Deck Assy

Figure 3 - Arm Eject Lever, Case Deck Assembly, and Top Shield Assembly

Screw 6-32 L=0.188
__________
9
Screw 6-32 L=0.250
Top Shield Assy
Screw 6-32
L=0.188