Jump Starting - BMW F 800 ST 2007 Rider's Manual

Replace the defective bulb.
7
Front flashing turn in-
dicator bulbs
108
R10W / 12 V / 10 W
with OE White turn
indicators:
RY10W / 12 V / 10 W
Rear flashing turn in-
dicator bulbs
R10W / 12 V / 10 W
z
with OE White turn
indicators:
RY10W / 12 V / 10 W
Turn bulb 2 clockwise to
install it in the bulb housing.
Working from the inboard
side, insert the glass into
the bulb housing and close
the housing.
Install screw 1.

Jump starting

The wires leading to the
power socket do not
have a load-capacity rating
adequate for jump-starting
the engine. Excessively high
current can lead to a cable
fire or damage to the vehicle
electronics.
Do not use the on-board
socket to jump-start the
engine of the motorcycle.