Helmet holder
4
Helmet holder
54
underneath seat
z
Helmet holder 1 is underneath
the seat. You can use the
wire rope available as an op-
tional extra to secure a helmet
to the helmet holder.
Using helmet holder
Make sure the ground is
level and firm and place the
motorcycle on its stand.
Remove the seat (
The helmet catch can
scratch the panelling.
Make sure the lock is out of
the way when you hook the
helmet into position.
Pass the wire rope available
as an optional accessory
through the helmet and slip
the eyes of the wire rope
over helmet holder 1.
Install the seat (
53)
Mirrors
Adjusting mirrors
Move the mirror to the de-
sired position by pressing it
lightly at the corner.
Spring preload
Spring preload and
weight
53)
It is essential to set spring
preload of the rear suspen-
sion to suit the load carried
by the motorcycle. Increase
spring preload when the mo-
torcycle is heavily loaded and