BMW F 800 ST 2007 Rider's Manual page 108

7
106
Connect plug 2.
z
Install cap 1.
Replacing the brake light
and rear light bulbs
If it is not standing firmly,
the motorcycle could
topple in the course of the
operations described below.
Always make sure that the
motorcycle is stable and
firmly supported.
Make sure the ground is
level and firm and place the
motorcycle on its stand.
Switch off the ignition.
Remove screws 1.
Pull the bulb housing to the
rear to remove.
Press bulb 2 into its
socket and turn it
counter-clockwise to
remove.
Replace the defective bulb.
Bulb of tail light/brake
light
P21/5W / 12 V / 5...21 W
Use a clean, dry cloth to
hold the new bulb.