Advertisement
13/10/2019
Installation
1. To mount the device on the wall, you can choose using the tape, or the screw.
Inclusion/Exclusion
On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the
devices of this network. This process is called Inclusion.
Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This
controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.
Inclusion
manual.zwave.eu/backend/make.php?lang=en&sku=PHIEPAT02-B
manual.zwave.eu/backend/make.php?lang=en&sku=PHIEPAT02-B
3/7
Advertisement
