Figure 12: Nut Tightening Order
Step 6:
Attach the spinner (nose cone) using the three M5 bolts and lock washers provided, as
shown in Figure 11. We recommend applying Loctite to the bolt threads prior to as-
sembly.
Tail Fin Fasteners
Figure 13: Tail Fin Attachment
Step 7:
Bolt the tail fin to the tail boom using the eight M5 bolts and lock-washers provided, as
shown in Figure 13. We recommend applying Loctite to the bolt threads prior to as-
sembly.
Step 8:
Place the tail boom on the rear of the turbine powerhead and insert the 1/2" tail pivot pin
from the top. If the parts are aligned properly the pin should insert easily. Do not use a
27