6) Installing the EXCEL1 Wind Turbine
EXCEL1 Wind Turbine Components
The major components of the EXCEL1 wind turbine are shown in Figure 8. Installing
the turbine requires connecting it to electrical wiring to the PowerCenter controller and
then assembling the turbine at the top end of the tower.
Figure 8: Major Components of the EXCEL 1
Wiring
The basic electrical schematic for the BWC EXCEL1 24-volt and 48-volt systems is
shown in Figure 9.
Powerhead
Tail Fin
Nacelle
Tail Boom
Tower
Mount
Alternator
Blades
Spinner
22