KMART 42956952 Quick Start Manual page 7

5-B
5-A
Step 6: Install the Monitor.
Take out the monitor and unscrew the bolts from the back of monitor, then assemble it on the
handle bar post. Connect the three wires from the monitor together with the wires from the part of
step 5.
Note: the PULSE wire from monitor and handlebar should be connected together. The
SENSOR Wire from monitor and handlebar post should be connected together which
marked in same color.
Step 7: Install the Right and Left Pedal
Connect the left & right pedal (Part 12 & 13) together with left & right pedal post, secure them with
screws (Hardware 1-3).
7-A 7-B
6