KMART 42956952 Quick Start Manual page 6

Step 4: Install the Pedal Post.
Assemble the left and right pedal post (Part 6) & (Part 7) to the part of step 3 through the
connector, then screw the bolts at two ends. Connect the left and right pedal post (Part 6) & (Part 7)
together with the crank of main frame respectively, secure them with the bolt & nut (Hardware 1-4).
Step 5: Install the Handlebar.
A. Insert the left and right handlebar (Part 8 & 9) to the tube of left and right pedal post respectively,
then secure them with screws (hardware 1-2).
B. Connect the U-shaped handlebar (Part 10) together with the handlebar post, secure them with
screws (Hardware 1-1).
Note: Please let the three wires out of the tube. One sensor wire is from the tube of
handlebar post (Part 4), the other two wires are from the U-shaped handlebar (Part 10).
5