Bosch FLEXIDOME multi 7000i User Manual page 33

FLEXIDOME multi 7000i | FLEXIDOME multi 7000i
IR
The Storage overview field displays the logical drives.
Local Media
A microSD card inserted in the camera can be used for local recording.
4
The Storage overview field shows the local media.
Note: microSD card recording performance is highly dependent on the speed (class) and
performance of the microSD card. It is recommended to use an Industrial microSD card.
Local storage
To activate the ANR settings, Recording 1 must be assigned to an iSCSI target and Recording
2 to a local storage.
This function enables recording to the iSCSI target. If there is a network disconnection, the
video is recorded to the local storage. When the network is recovered, the video recorded to
the local storage is transferred to the iSCSI target and completes the missing information.
Activating and configuring storage media
Available media or iSCSI drives must be transferred to the Managed storage media list,
activated, and configured for storage.
Note:
An iSCSI target storage device can only be associated with one user. If a target is being used
by another user, ensure that the current user no longer needs the target before decoupling
that user.
1.
2.
3.
Deactivating storage media
A storage medium in the Managed storage media list can be deactivated. It is then no longer
used for recordings.
1.
2.
Formatting and wiping storage media
Formatting the storage media can be necessary to delete all data and recreate a valid file
structure to be usable.
All recordings on a storage medium can be deleted at any time. Check the recordings before
deleting and back-up important sequences on the computer's hard drive.
1.
2.
3.
4.
Wiping the storage media deletes all data without recreating a valid file structure.
To wipe the recordings from the storage media:
1.
Bosch Security Systems B.V.
If the microSD card is password protected, enter the password into the Password field.
In the Storage overview section, double-click a storage medium, an iSCSI LUN or one of
the other available drives.
– The medium is added as a target in the Managed storage media list.
– Newly added media is shown as Not active in the Status column.
Click Set to activate all media in the Managed storage media list.
– The Status column shows all media as Online.
Check the box in the Rec. 1 or Rec. 2 column to specify the recording tracks to be
recorded on the target selected.
Click a storage medium in the Managed storage media list to select it.
Click Remove below the list. The storage medium is deactivated and removed from the
list.
Click a storage medium in the Managed storage media list to select it.
Click Edit below the list.
Click Format in the new window to delete all recordings in the storage medium.
Click OK to close the window.
Click a storage medium in the Managed storage media list to select it.
User manual
Configuration | en 33
2021-04 | 01 |