Advertisement
The JA-122PW/JA-122PW (G) Bus dual PIR and MW motion detector
the nature of MW detection, the detection characteristic can drastically
change in relation to the size, shape and furnishing of a protected area,
especially with regard to metallic materials which can reflect or block
transmitted MW signals.
During installation, it's always necessary
to test whether the detector sufficiently
covers the area.
Installation accessories
JA-196PL-L – Detector wall holder.
If a more aesthetic installation is required, it is possible to use the
JA-196PL-L wall bracket, it is supplied in two colours – white and grey. With
the use of this bracket it is possible to partially put the detector in a wall or
plasterboard wall.
JA-191PL – PIR jointed bracket.
It is used for special placement, such as installation on the ceiling or at a tilted
angle (greater installation height). The jointed bracket is a certified detector
accessory having its own tamper contact which is to be connected to a connector
inside the detector (6).
JA-122PW/JA-122PW (G)
Technical specifications
Power supply:
from the control panel bus 12 V DC (9 ... 15 V)
Current consumption:
- in standby mode
- for cable choice
Recommended installation height:
Detection angle/PIR coverage:
Detection angle/MW coverage:
MW Frequency:
Maximum MW radio-frequency power (ERP):
Dimensions:
Weight:
Classification:
Environment:
Operating temperature range:
Average operational humidity:
Certification body:
In compliance with:
EN 62368-1, EN 50581, EN 50131-1, EN 50131-2-4
Operating conditions according to general authorization
JABLOTRON ALARMS a.s. hereby declares that the
product is in a compliance with the relevant
JA-122PW (G)
European
Union
2014/53/EU, 2014/35/EU, 2014/30/EU, 2011/65/EU if it is used as
intended. The original of the conformity assessment can be found
at www.jablotron.com - Downloads section.
Note: Although this product does not contain any harmful
materials, we suggest you return the product to the dealer or
directly to the producer after use. For additional info please visit
www.jablotron.com
2/2
2.2 – 2.5 m above floor level
24.125 GHz
150 x 63 x 40 mm
Security grade 2/Environmental class II
(According to EN 50131-1)
Indoor general
-10 °C to +40 °C
75 % RH, w/o condensation
Trezor Test s.r.o. (no. 3025)
ETSI EN 300 440, EN 50130-4, EN 55032,
ERC REC 70-03
JA-122PW/
harmonisation
legislation:
Directives
in the download section.
MON51101
5 mA
16 mA
90°/12 m
80°/12 m
30 mW
120 g
No:
Advertisement
