Product Replacement; Ingredient Cartridge Overview - Coca-Cola freestyle 8000 User Manual

product replacement

ingredient cartridge overview

SmartPAK™ (paperboard) cartridges are lightweight,
recyclable, and designed to optimize backroom
storage space.
Inventory & Quick Replacements:
• Be prepared during rush periods! Place fast moving ingredient cartridges
in extra trays and stage near dispenser for fast change outs.
• Use your oldest ingredient cartridges on hand first, i.e.
"FIRST-IN ~ FIRST-OUT."
• Always ensure ingredient cartridges are
organized by "enjoy by dates" to effectively
the trays over time.
manage inventory.
Storage Conditions:
• Avoid placing cartridges and plastic
trays near any heat source, standing
water, or cleaning solutions.
Cleaning Trays:
• Black plastic cartridge trays should
be 'hand washed' only. Use dish soap,
followed by Kay 5 sanitizer or
approved equivalent and allow to air
dry. NEVER PLACE IN A DISHWASHER.
Placing trays in a dishwasher may warp
© 2020 The Coca-Cola Company | Coca-Cola Freestyle® 8000 User Guide | Confidential information of The Coca-Cola Company | 20200820
NEW
Push & Click Ingredient Trays
Some outlets will convert to an updated Push & Click ingredient tray.
To install these new trays follow the instructions below:
Prior to installation, hand wash trays using only dish soap and
Kay-5 sanitizer or an approved equivalent.
Replace each cartridge one at a time. This is crucial to ensure
ingredient cartridges remain in the proper slot.
Open the cartridge door and remove the cartridge tray.
If you're installing a Push & Click Tray, remove the cartridge door
and thoroughly clean the cartridge slot and probe (see page 9).
Remove the ingredient cartridge from the existing tray and swap
into the new Push & Click tray. Then, insert the cartridge into the
slot and push until you hear the white latch click into place.
Once you install the new ingredient trays, close the dispenser door.
On the Dashboard screen, select "Prime All."
Traditional Trays Push & Click Trays
7
|