Magnet-physik EF 14 Operating Instructions Manual page 46

Electronic Fluxmeter
4
5
6
Answer:
Read:
Answer:
For compatibility with the EF 5, the EF 14 accepts instead of the command
COIL as well the command DEVICE.
Coil constant
CONST
Write:
Depending on the coil type, the following unit for the coil constant is
cm²
no unit
cm
kA/Vs
cm²
The parameter must be converted into the required unit, if necessary. It is not
necessary to send the unit to the EF 14.
The coil types 5 and 6 do not require a constant.
Answer:
Read:
Answer:
Coil resistance in Ohm, parameter: number ≥ 0, max. 90000000
OHM
Write:
Answer:
Read:
Answer:
Coil identification number, Parameter: number ≥ 0, max. 9999
ID
Write:
Answer:
Read:
Answer:
BA – no.: 100514EBA02
for Pole Coil
for Flux Etalon
for Integrator Mode
COIL x
?COIL
COIL x
#CONST x
for Field Coil (area turns, winding area)
for Surrounding Coil (number of turns)
for Moment Coil (measuring constant)
for Potential Coil (measuring constant)
for Pole Coil (area turns, winding area)
CONST x
?CONST
CONST x
#OHM x
OHM x
?OHM
OHM x
#ID x
ID x
?ID
ID x
(x = 0...6)
(x = 0...6)
x: numerical value 0.000001 ≤ x ≤ 90000000
assumed:
th
December 9 , 2020
EF 14
Page 46