Advertisement
Installation
1
Assembling the solar lights
A
B
Option 2
C
A
B
2
Preparing the solar panels
□
Slide the Switch to "ON" from the battery
compartment (1) location on the underside of the
solar panel top.
D
4
NOTE: To allow each battery to reach full capacity
and perform correctly, pull out the plastic tab and
place the solar light in full sunlight for the rst 12
hours. Failure to do so can shorten the life of the
battery or operation of the light. On cloudy or rainy
days it may take several days for the batteries to fully
charge.
NOTE: To protect the solar panel from damage, do
not use force during assembly. Keep the plastic
shades in the packaging until you need to install
them.
Advertisement
